KBC BAH-1010AVS Instruction Manual page 58

I
OPERATING INSTRUCTIONS
RELATED
DOCUMENT
EN 292
HAZARD SITUATION
Ejection or gravity fail o f pans, o f
workpiece and swarf
Unrestrained machine or machine
part(maintained in position by
gravity) falls or overturns.
Ejection or spillage of
metalworking fluid and lubricants
(also hydraulic fluid if used).
Swarf entrained in spilled fluids.
Work at heights.
Contact with live parts.
(Do not apply). There's no such
problem on the machine.
(Do not apply).
The doesn't use heat source, so
there's no such problem.
Malfunction o f the PLC unit.
{AZARD
No.
)
!
REFERENCE
Description
Ejection of parts (of
~nachinery and
machine parts)
Loss o f stability (of
~nacliinery and
macliine pats
Slip, trip and fall
hazards in relationsl~ip
with ~nacliinery
(because o f their
mechanical natllre)
Electrical 11az:lrds.
caused l o r example
by:
I3ectrical colitacl
(direct o r indirect)
Electrostatic
phenomena
Thermal radiation or
other phenomena such
as ejection o f molten
particles, and chemical
effects rroni sliort-
circuits, overloads; etc.
External influences on
electrical equipment
Tliermal hazards
r e s ~ ~ l t i n g
in:
PROCESS
Right after the sawing process.
When moving the machine.
During and after sawing process.
During changing of coolant.
During and after maintenance.
During machine installation, when
connecting the power to the machine.
During repairlservice o f electrical control
unit.
During the machine running.
DANGER ZONE
I n front ofthe machine next to the work
tray.
Next to the machine.
Floor and stepping areas on and around
machine and workpiece.
Near the power line.
Near the electrical control box.
Near the saw head or saw blade.