Table of Contents
Advertisement
- - - -
SAFETY RWES
Be sure to prohibit any use of fire in the shop, and install
a
fire-extinguisher or other fire control
device near the machine when cutting titanium, magnesium, or
any
other material that produces
flammable chips. Never operate the machine unattended when cutting flammable materials.
Use
roller tables on both front and rear sides of the machine when cutting the long work. It is
dangerous if the work falls off the machine when the roller tables are not used.
Take preventive measures when cutting thin or short pieces from the work to keep them
f r o m
falling. It is dangerous if the cut piece falls.
Hide quick links:
Advertisement
Table of Contents
