Mitsubishi Electric FR-E500 Instruction Manual page 78

C H A P T E R 4
CHAPTER 4
P A R A M E T E R S
PARAMETERS
This chapter explains the "parameters" of this product.
With the factory settings, the inverter is designed to perform
simple variable-speed operation. Set necessary parameter
values according to the load and operating specifications.
Always read the instructions before using the equipment.
4.1 Parameter List .......................................................... 64
4.2 Parameter Function Details ...................................... 73
Note: By making parameter settings, you can change the
functions of contact input terminals RL, RM, RH, MRS,
open collector output terminals RUN, FU, and contact
output terminals A, B, C. Therefore, signal names
corresponding to the functions are used in the description
of this chapter (except in the wiring examples). Note that
they are not terminal names.
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6