Mitsubishi Electric FR-E500 Instruction Manual page 72

(3) Parameter clear
Initializes the parameter values to the factory settings. The calibration values are not
initialized.
(Parameter values are not cleared by setting "1" in Pr. 77 "parameter write disable
selection")
Note: 1. In the FR-E520-0.1K to 7.5K-NA and FR-E510W-0.1K to 0.75K-NA, Pr. 122
"communication check time interval" setting is "0". (Factory setting: 9999)
2. The Pr. 75 "reset selection/PU disconnection detection/PU stop selection"
value is not initialized.
(4) All clear
Initializes the parameter values and calibration values to the factory settings.
Note: 1. In the FR-E520-0.1K to 7.5K-NA and FR-E510W-0.1K to 0.75K-NA, Pr. 122
"communication check time interval" setting is "0". (Factory setting: 9999)
2. The Pr. 75 "reset selection/PU disconnection detection/PU stop selection"
value is not initialized.
SET
Cancel
SET
SET
Cancel
SET
58
Flicker
SET
1.5sec
Flicker
SET
1.5sec
3