Paradise Datacom Quantum Installation And Operating Handbook page 59

Quantum and Evolution Series Installation and Operating Handbook
Edit-Tx-Baseband-Advanced-Timeslots-Maintain ID Screen
Maintain timeslot ID over satellite: [Off]
Options:
Off
Timeslot identity will not be maintained.
On
The modem will activate the satellite CAS multiframe in order to provide
timeslot identity maintenance for certain numbers of timeslots.
Factory
Off
default:
Set to on if timeslots contain different data streams; set to off if timeslots
Description:
are all part of the same stream.
Edit-Tx-Baseband-Advanced-Timeslots-Idle Code Screen
Dropped timeslots: [Leave on bearer]
Options:
Leave on bearer
The Tx data remains on the bearer and will be accessible to
downstream equipment unless Rx data is inserted over it.
Replace with Idle code
The Tx data is replaced as follows (MSB to LSB):
G.732 timeslots are replaced with 01010101
G.732 CAS in TS16 is replaced with 0101 if CAS signalling is active
T1-D4 and T1-ESF timeslots are replaced with 10000000
Factory
Leave on bearer
default:
1:Off
2:On
1:Leave on bearer
2:Replace with Idle code
7-30