Table of Contents
Advertisement
Quantum and Evolution Series Installation and Operating Handbook
7.2.2
LCD Screen Layout
The front panel user interface uses a menu system to present choices to the user. These
in turn allow either the selection of a value from a list of options or require the entering of
a new value. Examples of these types of screen are shown below.
Station clock source: [None]
Screen Type 1: Menu Selection from Pre-defined List
IF carrier freq:50 to 90, 100 to 180MHz
New: 070.0000
Note: features that are not available appear on the display are preceded by a '#'. There
are several reasons why a feature may not be available:
•
The feature is a Software Activated Feature (SAF) and the appropriate SAF code has
not been enabled. Please contact Paradise Sales who can issue a SAF key to unlock
the feature. Alternatively, all SAF features can be enabled for a limited time as
described in Section 8.5.
•
The feature is 'advanced' and the user level setting is 'basic'. This is a mechanism
that has been added to simplify the user interface by hiding options that are less
frequently used. Advanced features can be displayed using the process described in
Section 7.3.3.3.
•
The feature is available but its use is precluded by the current operational modem
settings (for example, in normal use, Reed-Solomon 'n' and 'k' values are controlled
automatically and cannot be set by the user).
1:None
2:BNC
3:RS422
[070.0000] Step 100Hz
Screen Type 2: Entry of New Value
7-5
Advertisement
Table of Contents
