Table of Contents
Advertisement
Quantum and Evolution Series Installation and Operating Handbook
Edit-Unit-Interface-Terrestrial-IP VLAN ID Screen
VLAN ID:0 to 4094
New: 0000
None
Units:
0
Minimum value:
4094
Maximum value:
1
Step size:
0
Factory default:
Sets a specific value of VLAN id. This is required only for remote
Description:
modems – assigning a VLAN id to a Hub modem has no effect. The
VLAN id is used to uniquely identify each remote modem. It is used to
filter wanted from unwanted IP packets in point-to-multipoint systems
where there is a direct return path and VLAN tags are not already being
used in relation to the data entering the modems from the terrestrial
network. VLAN ids of remote modems are automatically learnt by the
Hub and all traffic destined for a particular remote modem is tagged at
the Hub allowing it to filter wanted traffic. The VLAN tags are removed by
the modems prior to onward transmission.
Edit-Unit-Interface-Terrestrial-IP Web Proxy Screen
Web acceleration:[Off]
Options:
Off
In this mode, all HTTP requests to web servers pass through the modem
as normal (with no special processing).
On
In this mode, the modem stores web pages returned from web servers as a
result of requests made by users from their web browsers. Once the web
page has been received by the modem, the modem parses through the
[0000] Step 1
1:Off
2:On
7-124
Advertisement
Table of Contents
