Table of Contents
Advertisement
Quantum and Evolution Series Installation and Operating Handbook
the new address unless the ARP table on the device is flushed (the ARP
table is used to match IP addresses and MAC addresses).
Edit-Unit-M&C-IP Subnet Mask Screen
Remote control port IP netmask:
New: 255.255.000.000
255.255.0.0
Factory default:
Sets the remote control port IP subnet mask. The same IP subnet mask
Description:
is used by the modem for traffic purposes, when configured for IP traffic.
Edit-Unit-Clocks Screen
Station clock source: [None]
Options:
None
BNC
RS422
Factory default:
None
Controls the station clock source to be used in place of either the internal
Description:
10MHz reference or to replace only the Rx reference clock.
[255.255.000.000]
1:None
2:BNC
3:RS422
7-142
Advertisement
Table of Contents
