Quantum and Evolution Series Installation and Operating Handbook
Edit-Rx-Clocks-Advanced-Multiframe Sync Screen
Maintain multiframe sync: [Maintain]
Options:
Do not maintain
Maintain
Factory default:
Maintain
Controls whether the Rx buffer should be increased when necessary to
Description:
maintain multi-frame sync when the buffer slips.
7.3.3.2.5 Edit-Rx-Demodulation Menu
1:Mode
3:Sweep width
This menu contains the following options:
•
Mode. This selects the receive path modulation scheme.
•
Sweep. This controls the Rx signal sweep configuration.
•
Sweep width. This controls the Rx signal sweep width.
•
Advanced. This controls symbol mapping in relation to how data is mapped to signal
constellations in QPSK mode; it also controls whether I and Q bits are swapped in
BPSK mode.
Edit-Rx-Demodulation Screen
See the description of the transmit path equivalent.
The table shown under Edit-Tx-FEC-Inner defines normal operation with respect to FEC
mode, FEC rate and modulation scheme.
1:Do not maintain
2:Maintain
2:Sweep
4:Advanced
7-92