Lower Feeding Assembly - Canon imageRUNNER 330 Service Manual

3) Shift (displace) the feeding belt [2] to the
side.
4) Using a small flat-blade screwdriver, free
the hook of the feeding fan cover [3].
[2] [3]
Figure 7-227
5) Removing the feeding fan.
Caution:
When removing the feeding fan cover or
the feeding fan, take care not to damage
the feeding belt.
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 400/330 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP/FEEDING SYSTEM
D. Lower Feeding Assembly
1. Removing the Lower Feeding
1) Remove the front door and the inside
2) Remove the cassette 1/2.
3) Remove the pick-up assembly.
4) Lock the feeding assembly.
5) Remove the lower left door.
6) Remove the delivery assembly and the
7) Disconnect the two connector [1].
[2]
7) Open the duplexing assembly inlet guide
Assembly
cover.
fixing assembly.
[1]
Figure 7-228
plate [2] until it is upright, and lift it to
remove.
Figure 7-229
[1]
[2]
7-59