Canon imageRUNNER 330 Service Manual page 336

CHAPTER 11 SYSTEM INTEGRATION
III. DISASSEMBLY/ASSEMBLY
The machine possesses the mechanical characteristics discussed in the following pages; go
through the instructions given when disassembling/assembling the machine's parts while keeping
the following in mind:
1. Disconnect the power plug before disassembly/assembly work.
2. Assemble the parts by reversing the steps used to disassemble them, unless otherwise noted.
3. Identify the screws by type (length, diameter) and location.
4. Do not operate the machine with any of its parts removed, unless otherwise mentioned.
5. Do not remove any screws that are paint-locked in place during disassembly work.
11-7
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 400/330 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)