Canon imageRUNNER 330 Service Manual page 5

Chapter 13 Maintenance and Servicing provides tables of periodically replaced
parts and consumables/durables and scheduled servicing charts.
Chapter 14 Troubleshooting provides tables of maintenance/inspection,
standards/adjustments, and problem identification (image fault/
malfunction).
Appendix contains a general timing chart and general circuit diagrams.
The descriptions in this Service Manual are subject to change without notice for
product improvement or other purposes, and major changes will be communicated in the
form of Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this
Service Manual and all relevant Service Information bulletins, and be able to identify and
isolate faults in the machine.
For a full understanding of the copier, this Service Manual should be used side by side
with the separately available "Copier Basic Series." Refer to the descriptions in each of
the following volumes:
Volume 1
Volume 2
Volume 3
Volume 4
Volume 5
Volume 6
Volume 7
ii
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 400/330 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)