Scheduled Servicing Table - Canon imageRUNNER 330 Service Manual

IV. SCHEDULED SERVICING TABLE
Caution:
Do not use solvents/oils not indicated here.
A. Copier
Unit
Scanner drive Scanner rail
assembly
Optical assembly No. 1 through No. 3
mirrors
Dust-proofing glass
Lens
Reflecting plate
Original size sensor
Developing Developing assembly
assembly roll
Feeding assembly Transfer guide
Feeding belt
Feeding assembly base
Fixing Fixing assembly
assembly inlet guide
Upper separation claw
Lower separation claw
Note: For cleaning intervals, use the hardware counter reading as a reference.
COPYRIGHT © 1999 CANON INC.
CHAPTER 13 MAINTENANCE AND SERVICING
: Clean : Replace
Part Installation
CANON imageRUNNER 400/330 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
: Lubricate
every every every
60,000 120,000 240,000
: Adjust : Inspect
Remarks
Use lubricant.
Note
During a visit.
Clean as necessary.
During a visit.
Clean as necessary.
During a visit.
Clean as necessary.
13-5