Canon imageRUNNER 330 Service Manual page 311

CHAPTER 10 EXTERNALS/AUXILIARY MECHANISMS
V. DISASSEMBLY/ASSEMBLY
Be sure to observe the following when disassembling/assembling the machine:
1. Disconnect the power plug for safety before starting the work.
2. Reverse the steps used to disassemble the parts when assembling them unless othewise noted.
3. Identify the screw by type (length, diameter) and location.
4. Do not remove any screws that are paint-locked when disassembling parts.
5. As a rule, do not operate the machine with any of its parts removed.
10-17
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 400/330 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)