Canon imageRUNNER 330 Service Manual page 525

CHAPTER 14 TROUBLESHOOTING
n SW701 States
n Size Configuration
Use service mode to set the appropriate size (COPIER>OPTION>BODY>MODEL-SZ).
The setting will affect the following items:
• Pattern for default enlargement/reduction.
• Size detection by the feeder. (If the setting under FEEDER>OPTION>SIZE-SW in service
mode is '1', AB/Inch detection will be made regardless of the country of installation.
n Arrangement of the Original Sensor
The arrangement of original sensors may be changed. If the feeder is used, these switch settings
need not be changed, since detection will be by the feeder. For sensor arrangement, see
"Identifying the Size of Originals" in Chapter 3.
Use SW5 and SW6.
14-126
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 400/330 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)