Canon imageRUNNER 330 Service Manual page 326

CHAPTER 10 EXTERNALS/AUXILIARY MECHANISMS
10. Drum Cartridge Cooling Fans
(FM14, FM15, FM16)
• Removing on Its Own
1) Remove the copyboard glass.
2) Remove the ruse band, and disconnect the
connector.
3) Remove the two screws, and remove the
stay.
4) Remove the fan.
[1]
[2]
[3]
[4]
Figure 10-546
10-32
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 400/330 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
• Removing the Three Fans at the Same
Time
1) Remove the copyboard glass.
2) Remove the wire saddle 1(rear, front).
3) Remove the ruse band [2], and disconnect
the connector [3].
FM14
[3]
4) Remove the two screws 4 (rear, front).
5) Remove the stay, and detach the fan.
[1]
[4]
Figure 10-547
[2]
[4]
[1]