Equipment; Detailed Description - Alcatel-Lucent OmniPCX Office Installation Manual

Chapter
2
This hardware must be installed on the customer's site, by a qualified installer, in
compliance with the instructions provided with the hardware.
Equipment shall be installed at the factory or in the field by submitter's trained personnel
in accordance with the installation instruction provided with the equipment.
2.4

Equipment

2.4.1

Detailed description

The following table lists the boards available on Alcatel-Lucent OmniPCX Office
Communication Server (S, M or L racks).
Board Function
APA2 2, 4 or 8 analog trunk line
APA4 interfaces
APA8
ATA2 2 or 4 analog trunk line
ATA4 interfaces
BRA2 2, 4 or 8 T0 basic accesses
BRA4
BRA8
CPUe Processing Unit (up to R1.1) -
64Mb SDRAM
Always equipped with Hard Drive
for Release R5.0 and above
CPU-1 Processing Unit (From R2.0)
CPU-2 Processing Unit (From R3.0) 64
Mb Flash Memory.
Always equipped with Hard Drive
for Release R5.0 and above
2-6
Optional boards
GSCLI: Ground Start
signaling
CLIDSP: CLIP local
management
MET: pulse meter
receivers (phased out)
HSL1, HSL2:
interconnection with
add-on modules
AFU, AFU-1: (Auxiliary
Function Unit)
HSL1, HSL2:
interconnection with
add-on modules
AFU, AFU-1: (Auxiliary
Function Unit)
VoIP4-1, VoIP8-1 and
VoIP16
Connections
Analog trunk line (TL),
TL-PS diversion
Analog trunk line (TL),
TL-PS diversion
ISDN network
ISDN-EFM T0/S0
forwarding box
Lanswitch or Ethernet
terminal
Please-wait message player
Tuner for background music
Alarm
Doorphone
Loudspeaker
General call ringer
ISDN-EFM T0/S0
forwarding box
Pulse metering device
OMC
Lanswitch or Ethernet
terminal
Please-wait message player
Tuner for background music
Alarm
Doorphone
Loudspeaker
General call ringer
ISDN-EFM T0/S0
forwarding box
Pulse metering device
OMC