System Startup From Omc; Overview - Alcatel-Lucent OmniPCX Office Installation Manual

6.1.1.14 SYSTEM RESET
This menu is used to confirm resetting the system.
After the reset, your system will operate with the new parameters entered.
6.2

System Startup from OMC

6.2.1

Overview

OMC is the PC application used to program the Alcatel-Lucent OmniPCX Office
Communication Server system via a local connection (V24 or LAN) or a remote connection
(the PC modem is connected to the Alcatel-Lucent OmniPCX Office Communication Server
integrated modem via the public network).
Three levels of programming are available using OMC:
- Easy View is used for Wizard configurations, i.e. the essential parameters for starting the
system.
- EasyPlus View is used for wizard-type configurations with the extensions offered by the
Advanced key. This key opens a window which is equivalent to Expert View.
- Expert View gives you unrestricted access to all the configuration possibilities.
The Wizard provides easy-to-use system programming, guiding the user step-by-step.
Use the Wizard to configure Internet Access functions by entering the CPUe-1/CPUe-2 board
IP address in the PC browser.
6.2.1.1 MINIMAL PC CONFIGURATION
- Pentium 166 MHz processor
- RAM: 128 Mb for Windows 2000 with SP4, Windows XP with SP2, or Windows Server
2003 with SP1
- Hard disk: 60 MB
- Screen: 800 x 600 pixels
- 1 mouse
- 1 serial port (connection to Alcatel-Lucent OmniPCX Office Communication Server for data
transfer)
System reset; the display shows "System reset in progress"
6-9