Equipment; Boards And Options - Alcatel-Lucent OmniPCX Office Installation Manual

Chapter
2
compliance with the instructions provided with the hardware.
Equipment shall be installed at the factory or in the field by submitter's trained personnel
in accordance with the installation instruction provided with the equipment.
2.4

Equipment

2.4.1

Boards and Options

The following table lists the boards available on OmniPCX Office RCE Small, Medium, Large.
Board Function
APA2 2, 4 or 8 analog trunk line
APA4 interfaces
APA8
ATA2 2 or 4 analog trunk line
ATA4 interfaces
BRA2 2, 4 or 8 T0 basic accesses
BRA4
BRA8
PowerCPU Processing Unit (As of R8.0),
SD/MMC Memory card (2GB),
256 MB DDR2 SDRAM.
Optional Hard Drive
DDI2 2 or 4 analog trunk line
DDI4 interfaces with Multiple
Subscriber Numbers (MSN)
LanX8 8 or 16 port Ethernet 10/100 BT
LanX16 (of which 1 or 2 10/100/1000 BT
LANX16-1 ports on LANX-2 boards)
LanX8-2
LANX16-2
PowerMEX Extension module controller
(equipped with
an HSL1 board)
2-6
Optional boards
GSCLI: Ground Start
signaling
CLIDSP: CLIP local
management
MET: pulse meter
receivers (phased out)
HSL1, HSL2:
interconnection with
expansion modules
AFU-1: (Auxiliary
Function Unit)
ARMADA VoIP32: VoIP
channels
Connections
Analog trunk line (TL),
TL-PS diversion
Analog trunk line (TL),
TL-PS diversion
ISDN network
ISDN-EFM T0/S0
forwarding box
Lanswitch or Ethernet
terminal
Please-wait message player
Tuner for background music
Alarm
Doorphone
Loudspeaker
General call ringer
ISDN-EFM T0/S0
forwarding box
Pulse metering device
OMC
Analog trunk line with
Multiple Subscriber
Numbers (MSN)
@ Phones, Hub, Lanswitch,
PC, etc.