Alcatel-Lucent OmniPCX Office Installation Manual page 125

Configure the Internet Browser without proxy. In this case, the network parameters of the PC
must be set as shown in the "NETWORK SERVICES" section.
4.9.1.3 E-MAIL
Alcatel-Lucent OmniPCX Office Communication Server is used to offer an electronic
messaging solution for all users in a company. To do this, it supports various configurations:
- Alcatel-Lucent OmniPCX Office Communication Server is the company mail server.
- It can be integrated into the company network if it already has a messaging server.
- Alcatel-Lucent OmniPCX Office Communication Server provides access to an external
voice mail server.
4.9.1.3.1 Alcatel-Lucent OmniPCX Office Communication Server is the company mail
server.
Alcatel-Lucent OmniPCX Office Communication Server makes available to each user a local
letter box, and manages the flow of messages between users of the local network and those to
and from the Internet. The protocols used by this server are SMTP, to send messages, and
POP3 or IMAP4, to manage mail boxes.
The account and password configured in the messaging tool are the Alcatel-Lucent OmniPCX
Office Communication Server user login and password.
4.9.1.3.2 Alcatel-Lucent OmniPCX Office Communication Server can be integrated into
the company network if it already has a messaging server.
If the company is connected to the Internet via Alcatel-Lucent OmniPCX Office Communication
Server, it is used as the gateway between the LAN and the Internet for the exchange of
messages. In such cases, the user must specify:
- The e-mail server's IP address on the LAN.
- The protocol used for e-mail messages coming from the IAP: SMTP or POP3 depending
on the IAP's operating mode.
4.9.1.3.3 Alcatel-Lucent OmniPCX Office Communication Server provides access to an
external voice mail server.
There is no messaging server in the company (Alcatel-Lucent OmniPCX Office
Communication Server or LAN).
Alcatel-Lucent OmniPCX Office Communication Server is used as the gateway between LAN
and Internet. To enable the exchange of e-mails between the client PCs on the LAN and the
Internet, the firewall rule "e-mail" must be opened (see chapter on making Internet access
secure).
4.9.1.4 ACCESS TO AN FTP SERVER
4.9.1.4.1 Access via the Proxy
If authentication is required to access the FTP server, the login and password must be sent
in the URL as follows:
ftp://<login>:<password>@<ftp site name>.
4.9.1.4.2 Direct access without proxy
4-81