Alcatel-Lucent OmniPCX Office Installation Manual page 169

navigation bar. The administration screens give access to the lists of:
• Users per group
• Connection profiles
• Time Ranges
• URL filter
• Mailing lists
• Teleworker and VPN services
• Certificates and revocation lists
• Firewall rules
• Backups performed
• System information
• Test tools
• Software keys
From the administration screens you can access the configuration screens.
3. the configuration screens.
The following screens are associated with the administration screens: Users, User Groups,
Connection Profile, Time Range, URL Filter, Firewall Rule and Mailing List.
The following screens are used to directly configure the associated features:
• Proxy
• E-mail
• RAS
• Network
• Firewall
• Backup
• Anti-virus
6.3.3.1.3 CONNECTION TO WBM
For an administrator or operator, the procedure for connecting to the WBM is as follows:
1. Open the Web navigator.
2. Enter the following address in the Address field of the Web navigator:
https://<Alcatel-Lucent OmniPCX Office Communication Server>/admin
where <Alcatel-Lucent OmniPCX Office Communication Server>is the machine's IP
address or name.
You go to the Web-Based Management - Authentication page.
Caution:
For the first WBM connection (i.e., installation), instead of accessing the login page directly
you access the Start-up Assistant. Here you will be asked to change the administrator and op-
erator passwords.
3. In the Administrator/operator authentication area, type in either:
• A user name belonging to a group that has administrator rights or "admin", followed by
the associated password.
• A user name belonging to a group that had operator rights or "operator" followed by the
associated password.
4. Click on Connect. Your service connection is established.
Depending on your profile (administrator or operator), the WBM Administrator Home
6-21