Alcatel-Lucent OmniPCX Office Installation Manual page 163

Access to modes 2, 3, 4 and 5 is password protected: pbxk1064 (using the OMC tool)
Access to modes 2 and 3 is password protected: help1954 (using the OMC Easy tool)
6.2.3.1 Mode 1: Data and tool repository
This mode is used to create .crp files offline (collective customer directories) which are used in
the Typical Installation menu.
6.2.3.2 Mode 2: Typical installation
This mode is used for online manual programming by choosing between Company and Hotel
and automatically on-line using .crp files.
Remark:
The choice Company/Hotel is only offered once. It is necessary to perform a cold reset to see it again.
6.2.3.2.1 Initial Business Installation Wizard
- Default Numbering Plan
- Installation number
- Operating mode
- Channels and Bundles
- DECT ARI
- Creation of DECT handsets
- Metering
- Date and time
- Terminal List
- Various Subscribers
- Collective speed dial
- OS groups
- Call groups
- Broadcast groups
- Intercept groups
- Screening
6.2.3.2.2 Initial Hotel Installation Wizard
As well as the Business configuration, this wizard can be used to configure terminal numbers
in the hotel rooms.
6.2.3.2.3 Installation Wizard
This wizard enables you to use a .crp type file created under Data and tool repository ->
Information Repository Wizard.
Follow the instructions; if the data is accepted it is transmitted to the system which is then
reset.
6.2.3.3 Mode 3: Typical modification
6-15