Alcatel-Lucent OmniPCX Office Installation Manual page 173

and modify the desired parameters.
6.3.5.1.3 CREATION OF A DSL MODEM/CABLE MODEM TYPE CONNECTION
Click on Wizards in the navigation bar. The assistants" icons appear.
1. Click on the Connection Assistant icon. The "Connection Assistant" window displays.
2. In the Profile identification area, fill in the following field:
• Profile name: this name identifies the new Internet connection managed by
Alcatel-Lucent OmniPCX Office Communication Server. The profile groups together all
the parameters associated with the connection. It is advisable to enter a name that is
representative of the created connection, such as the name of the access provider.
3. Check the Configure this profile as the active profile box if the profile you are creating
is to be active.
4. Click on Next. A new window appears.
5. In the Connection type area, click DSL Modem/Cable modem (requires 2 Ethernet
interfaces).
6. Click on Next. A new window appears.
7. In the DSL Connection Parameters area, chose the protocol used in the drop-down list
Connection's Protocol:
• PPPoE (direct Ethernet connection)
a. In the Connection Mode field, select On Demand if your access is not permanent.
b. Click on Next. A new window appears.
c. In the Authentication parameters area, fill in the following fields:
•
•
•
d. Click on Next. A new window appears.
e. In the IP Address Allocation area, you have two choices:
•
•
f. In the ISP's DNS area, you have two choices:
•
•
g. Click on Next. The Summary window displays. This stage is used to verify the
connection properties.
h. Click Finish to validate the parameters. Click Previous to return to the previous
screens and modify the desired parameters.
•
i. Click on Next. A new window appears.
j. In the DSL Modem/Cable modem Connection area, fill in the following fields:
a. •
Account name: enter the account name sent by the access provider.
Password: input the password associated to the connection's account name.
Confirm the password: enter the same password as was just entered. This
confirmation filters out typing errors.
Dynamic Allocation: the ISP manages the IP address negotiation.
Fixed IP address: enter the IP parameters supplied by the ISP.
Dynamically find the ISP DNS: the DNS resolution is automatic during
connection.
Set the ISP's DNS: input the IP address for the ISP's primary DNS in the ISP's
primary DNS field. We recommend keeping automatic DNS resolution.
PPTP (tunnelling)
WAN interface IP address: input the IP address of the WAN interface.
6-25