Alcatel-Lucent OmniPCX Office Installation Manual page 174

Chapter
6
•
•
b. Click on Next. The Summary window displays. This stage is used to verify the
connection properties.
c. Click Finish to validate the parameters. Click Previous to return to the previous
screens and modify the desired parameters.
•
d. Click on Next. A new window appears.
e. In the ISP's DNS area, you have two choices:
•
•
f. Click on Next. The Summary window displays. This stage is used to verify the
connection properties.
g. Click Finish to validate the parameters. Click Previous to return to the previous
screens and modify the desired parameters.
6.3.5.1.4 CREATION OF AN EXTERNAL ROUTER TYPE CONNECTION
Click on Wizards in the navigation bar. The assistants" icons appear.
1. Click on the Connection Assistant icon. The "Connection Assistant" window displays.
2. In the Profile identification area, fill in the following field:
• Profile name: this name identifies the new Internet connection managed by
Alcatel-Lucent OmniPCX Office Communication Server. The profile groups together all
the parameters associated with the connection. It is best to give it a name that
represents the newly created connection - the name of the access provider, for
example.
3. Check the Configure this profile as the active profile box if the profile you are creating
is to be active.
4. Click on Next. A new window appears.
5. In the IP Address Allocation area, you have two choices:
• Dynamic Allocation: the ISP manages the IP address negotiation.
• Fixed IP address: enter the IP parameters supplied by the ISP.
6. Click on Next. A new window appears.
7. In the ISP's DNS area, you have two choices:
• Dynamically find the ISP DNS: the DNS resolution is automatic during connection.
• Set the ISP's DNS: input the IP address for the ISP's primary DNS in the ISP's
primary DNS field. We recommend keeping automatic DNS resolution.
8. Click on Next. The Summary window displays. This stage is used to verify the connection
properties.
9. Click Finish to validate the parameters. Click Previous to return to the previous screens
and modify the desired parameters.
6.3.5.1.5 CREATION OF LAN SERVER CONNECTION
6-26
IP address of the DSL modem: enter the IP address of the external modem.
Subnet mask: enter the defined mask.
IP over Ethernet
Dynamically find the ISP DNS: the DNS resolution is automatic during
connection.
Set the ISP's DNS: input the IP address for the ISP's primary DNS in the ISP's
primary DNS field. We recommend keeping automatic DNS resolution.