Alcatel-Lucent OmniPCX Office Installation Manual page 48

Chapter
4
All outputs are made using Female RJ45 connectors.
Remark:
the CPU-2 and MIX boards used for Alcatel-Lucent OmniPCX Office Compact Edition have the same
characteristics as those used by Alcatel-Lucent OmniPCX Office Communication Server.
4.2.1.1.1 CPU-1, CPU-2, CPU-3, CPU-3m, CPU-4, CPUe-1 and CPUe-2 boards
RJ45 pin
LAN
AUDIO-OUT
CONFIG
MODULE1
MODULE2
AUDIO-IN
DOORPHONE
SLI1/SLI2
T01/T02
- LAN : 10/100 base T Ethernet port (MDI-II/straight), for connections between CoCPU-1,
CoCPU-2 and LAN.
- AUDIO-OUT: Interfaces Loudspeaker alarm General ringer; 12V output
- AUDIO-IN : Interfaces PLEASE WAIT MESSAGE Background music
- DOORPHONE : Interfaces doorphone
- CONFIG : RS232 for OMC.
- MODULE1: HSL link for connection to add-on module 1
- MODULE2: HSL link for connection to add-on module 2
Note:
The USB connector on the CPUe-1/CPUe-2 boards is not currently used.
4.2.1.1.2 CoCPU-1 and CoCPU-2 boards
4-4
1 2
TX+ TX-
Audio Out Audio
A Out B
CTS DSR
TX+ TX-
TX+ TX-
Audio In
Audio In A
B
3 4 5
RX+
Alarm A CenRg A CenRG B Alarm B Ground
RX Ground Ground
RX+
RX+
Audio
Ctrl A
DoorPh
DoorPhA1 DoorPhA2DoorPhB2
B1
ZA1
TX+ RX+
6 7
RX-
TX DTR
RX-
RX-
Audio
Ctrl B
ZB1 ZA2
RX- TX-
8
+12 V
RTS
ZB2