Alcatel-Lucent OmniPCX Office Installation Manual page 84

Chapter
4
- Plug in the handset cable (connector
Wall mounted
Preparing the terminal
- Turn the terminal
- Unscrew A and remove the metal plate.
- Slide this plate up the lower groove and secure it with screw B.
- Remove the handset hang-up lug by turning screw C through half a turn.
Mounting the terminal
- Drill two hole respecting the dimensions given below.
- Position the supporting screws as shown below.
- Attach the terminal
Mounting optional modules:
4-40
) into the guide intended for this purpose.