Alcatel-Lucent OmniPCX Office Installation Manual page 172

Chapter
6
1. Click on the Connection Assistant icon. The Assistant connection window displays.
2. In the Profile identification area, fill in the following field:
• Profile name: this name identifies the new Internet connection managed by
Alcatel-Lucent OmniPCX Office Communication Server. The profile groups together all
the parameters associated with the connection. It is best to give it a name that
represents the newly created connection - the name of the access provider, for
example.
3. Check the Configure this profile as the active profile box if the profile you are creating
is to be active (default value).
4. Click on Next. A new window appears.
5. In the Connection type area, click ISDN.
6. Click on Next. A new window appears.
7. In the ISDN connection parameters area, fill in the following fields:
• ISP phone number: enter the telephone number dialled when connecting to the IAP.
Must include any external line prefix for calling outside the company.
• ISDN bandwidth: select the bandwidth type in the drop-down menu. Three choices
are possible for the number of B channels used:
•
•
•
• Connection mode: three choices are possible:
•
•
•
8. Click on Next. A new window appears.
9. In the Authentication parameters area, fill in the following fields:
• Account name: enter the account name sent by the access provider.
• Password: input the password associated to the connection's account name.
• Confirm the password: enter the same password as was just entered. This
confirmation filters out typing errors.
10. Click on Next. A new window appears.
11. In the IP Address Allocation area, you have two choices:
• Dynamic Allocation: the ISP manages the IP address negotiation.
• Fixed IP address: input the IP address provided by the ISP in thePublic IP Address
field.
12. In the ISP's DNS area, you have two choices:
• Dynamically find the ISP DNS: the DNS resolution is automatic during connection.
• Set the ISP's DNS: input the IP address for the ISP's primary DNS in the ISP's
primary DNS field. We recommend keeping automatic DNS resolution.
13. Click on Next. The Summary window displays. This stage is used to verify the connection
properties.
14. Click Finish to validate the parameters. Click Previous to return to the previous screens
6-24
64 kbps static (1 B channel)
Dynamic 64/128 Kbit/s (1-2 B channels): this option must not be chosen if the
connection to the access provider is 64 Kbits/s.
128 kbps static (2 B channels)
Dial on demand
Dial on demand - call-back allowed
Permanent connection