Equipment; Boards And Options - Alcatel-Lucent OXO Connect Series Installation Manual

Chapter 2

2.4 Equipment

2.4.1 Boards and Options

The following table lists the boards available on OXO Connect Small, Medium, Large.
For boards not in the catalogue anymore, see the technical communication on hardware and software
compatibility.
Board
APA2
APA4
APA8
BRA2-2
BRA4-2
PowerCPU EE
LanX8-2
LanX16-2
PowerMEX
(equipped with
an HSL1
board)
MIX244-2
MIX448-2
MIX484-2
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual
Hardware: Platform and Interfaces
Function
2, 4 or 8 analog trunk line inter-
faces
2 or 4 T0 basic accesses
Processing Unit, MSDB (Mass
Storage Daughter Board) 8 GB
equipped with eMMC (embed-
ded Multi-Media Card), 512 MB
DDR2 RAM.
8 or 16 port Ethernet 10/100 BT
(of which 1 or 2 10/100/1000 BT
ports on LanX-2 boards)
Extension module controller
2 or 4 T0 basic accesses + 4 or
8 UA interfaces + 4 or 8 Z inter-
faces
Optional boards
GSCLI: Ground Start
signaling
CLIDSP: CLIP local
management
HSL1, HSL2: intercon-
nection with expansion
modules
AFU, AFU-1: (Auxiliary
Function Unit)
Mini-MIX providing two
Z (Analog Extension)
ports and two T0 (ISDN
Basic Rate) accesses
ARMADA VoIP32, AR-
MADA VoIP64: VoIP
channels
Connections
Analog trunk line (TL), TL-
PS diversion
ISDN network
ISDN-EFM T0/S0 forward-
ing box
Lanswitch or Ethernet ter-
minal
Please-wait message play-
er
Tuner for background mu-
sic
Alarm
Doorphone
Loudspeaker
General call ringer
ISDN-EFM T0/S0 forward-
ing box
Pulse metering device
OMC
@ Phones, Hub, Lanswitch,
PC, etc.
ISDN network, analog Z
terminals and Alcatel-Lu-
cent 9 series
24/207