Bypass Copying By Specifying The Copy Size - Toshiba e-STUDIO25 Operator's Manual

Bypass Copying by Specifying the Copy Size

By specifying the copy size in bypass copying, you can select the following copying modes:
• Duplex copying
• Magazine sort
1 Place sheets of copy paper on the stack feed bypass.
2 Select the desired copy size.
• Use the or
Make sure that the desired copy size and its direction
are displayed. Then press the
3 Select the desired duplex printing mode, dual-page
copying, sort copying, offset, magazine sort, 2-in-1/
4-in-1 or alternation as well as the image density
and the reproduction ratio.
Please note that the reversing automatic document
feeder (optional) and the automatic duplexing unit
(optional) are required for duplex printing and
magazine sort.
4
Key in the desired copy quantity using the numeric
keys.
5 Place the original(s) on the original feed tray or on
the glass.
(Setting Original.
6
Press the key.
• Dual-page copying
• 2-in-1/4-in-1
key to select the copy size.
key.
Page 2-4)
• Sort copying
• Alternation
Select paper size
01.LD
02.COMP
03.LG
04.LT
05.LT-R
06.ST-R
07.A4
08.A4-R
• Offset
1
2
3
4
5
6
7
8
9
10
11
12
3-7