Adf Test - Toshiba e-STUDIO25 Operator's Manual

3. ADF TEST

The ADF test checks the operation of the ADF or RADF by transporting and unloading documents. You
1
can confirm that the ADF or RADF operation is normal if the number of documents loaded is consistent
with the number of documents transported and unloaded.
2
1 Press the
3
2
Select "05.TEST MODE" and press the
4
5
3
Select "02.INDIVIDUAL TEST" and press the
6
7
4
Select "01.ADF TEST" and press the
8
5 Load the documents in the document tray.
9
6 Press the
10
• The documents will be transported one by one and the
11
number of documents unloaded will be displayed at the lower
right of the screen.
12
8-4
USER TEST MODE
key to enter the program menu.
key.
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
04.MENU LIST
05.TEST MODE
key.
TEST MODE
01.AUTO TEST
02.INDIVIDUAL TEST
03.TEST RESULT LIST
key.
INDIVIDUAL TEST
01.ADF TEST
02.KEY TEST
03.LED TEST
04.LCD TEST
05.SPEAKER TEST
06.SWITCH TEST
07.TEST PRINT
key.
ADF TEST
LOAD DOCUMENTS IN FEEDER.
ADF TEST
PRESS START KEY.
ADF TEST
PRESS START TO RESTART OR
STOP TO COMPLETE
ADF TEST
PRESS START TO RESTART OR
STOP TO COMPLETE
PAGES 001
PAGES XXX