1-Sided Originals > 2-Sided Copies - Toshiba e-STUDIO25 Operator's Manual

1. DUPLEX COPYING (Cont.)
1-Sided Originals > 2-Sided Copies
There are two methods of making duplexed copies from single-sided originals:
1
• Using the automatic document feeder (optional) or reversing automatic document feeder (optional)
- For duplex-copying from sheet originals of the specified sizes and weights.
• Setting originals on the glass - For duplex-copying from originals that cannot be handled by the automatic
document feeder (optional) or the reversing automatic document feeder (optional).
2
Note
This copying mode requires the automatic duplexing unit (optional) to be installed.
3
When using the Automatic Document Feeder (optional) or
the Reversing Automatic Document Feeder (optional)
4
1
Press the
initial screen for copying. The "EDIT MENU" screen
appears.
5
2 Confirm that "DUPLEX" is highlighted on the screen.
Then press the
6
3
Select "1 > 2" by pressing the
Then press the
7
to the initial screen for copying.
4 Select the desired paper cassette, image density,
reproduction ratio and copy quantity.
8
5 Place the originals on the feed tray.
9
10
6
Press the
11
12
4-4
EDIT MENU
key on the control panel while in the
key.
key. Press the
key.
READY
DUPLEX
DUAL TYPE
IMAGE SHIFT
key.
DUPLEX
Original > Copy
key to return
1 > 1
1 > 2
1
:1 > 1
:OFF
:OFF
1