Bypass Copying On Standard Size Paper - Toshiba e-studio550 Operator's Manual

4. BYPASS COPYING(cont.)

Bypass Copying on Standard Size Paper

1 perform steps 1 to 2 on pages 5-8, 5-9.
1
-Set the "OTHER" size key as necessary.
2
If the paper that has been set is a standard size other than A3,
A4, B4, B5, you will select the OTHER key in step 2. In this
case, you need to make the OTHER key recognize the same
size as the paper that has been set.
3
2 Press the key of the same size as the paper that
has been set.
4 -Non-standard size paper
5
6
3 If you set the paper other than plain paper, press
the MEDIA TYPE key.
7
8
4 After selecting the paper type key corresponding
to the type of the paper that has been set, press the
9
SET key.
10
If you select the media type key not corresponding to the type
of the paper that has been set, it may cause a problem such as
a paper jam, significant image deterioration and etc.
Select other copy modes as required.
11
5 Press the
12
5-10
USING THE SPECIAL FUNCTIONS
Page 5-11
START key.
Page 5-14