Toshiba e-STUDIO25 Operator's Manual page 139

5. CLEARING PAPER JAM (Cont.)
Paper Misfeeds in the Drum/Charger area
1
1 Making sure that the stack feed bypass and the
automatic duplexing unit are opened, open the side
cover.
2
3
2
Press the two blue levers. To release any paper in
4
the fuser unit.
Caution
5
• As the Fuser Section is heated, pay special attention when
handling it. If hot, allow the fuser to cool prior to touching.
6
3 Rotate the knob indicated with a blue arrow toward
the inside and remove any misfed paper.
7
8
9
10
11
4
After clearing all paper, return the two blue levers.
12
Close the exit cover and the right side cover. Return
the duplex unit to its normal position (if installed).
7-18
WHEN THE GRAPHIC SYMBOL FLASHES