Specifying Both Original Size And Copy Size - Toshiba e-STUDIO211c Operator's Manual

Specifying both Original Size and Copy Size

When the original size and copy size are specified, the reproduction ratio is automatically calculated to
make copies.
* Set the size for "the OTHER" key as required (
standard sizes other than LD, LG, LT or ST, you will select the OTHER key on the screen of step 4
below. Before pressing it, you need to make the OTHER key recognize the same size as the originals
or paper that have been set.
1 Place paper in the drawer(s).
2 Place the original(s).
3
Press the desired drawer, then the ZOOM··· key.
- The copy paper size is selectable on the screen in step 4
as well.
4 Press the ORIGINAL SIZE key of the same size as
the original.
- Using the original size and copy size, the correct reproduc-
tion ratio is computed and displayed on the screen.
- OTHER key
Select other copy modes as required.
5 Press the START key.
Page 2-4
Page 2-9
Page 6-16
Page 6-16). When the set originals or paper are
1
2
3
4
5
6
7
8
9
10
11
12
3-5