Automatic Sleep - Toshiba e-STUDIO25 Operator's Manual

Automatic Sleep

If the copier remains idle (Default: 15 minutes with the e-STUDIO16 and 45 minutes with the e-STUDIO20/25)
after entering Automatic Low Power mode as explained on the previous page, the copier shifts to the Super
Energy Saver mode. The
power than the Auto Lower Power mode. If there are documents in the automatic document feeder, the original
cover is open or the FAX option is installed; the machine enters the Sleep mode and "Sleep mode" appears on
the message display.
How to Change the Sleep Time
1 Press the key to enter the program menu.
2 Select "01. DEFAULT SETTINGS" and press the
key.
3 Select "01. MACHINE DEFAULTS" and press the
key.
Tip
"03. FAX SETUP" can be selected only when the FAX option
is installed.
4 Select "03. TIMERS" and press the
Tip
"02. WALKUP SCREEN" can be selected only when the FAX
option is installed.
5
Select "3. AUTO SLEEP" and press the
6
Select the desired Automatic Sleep Time by using
the or
• Select the waiting time from the following:
3, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80, 90,
100, 110, 120, 150, 180, 210 or 240 minutes.
LED turns on and the message display goes blank. This mode saves more
key.
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
PROGRAM
01.MACHINE DEFAULTS
02.COPY SETUP
03.FAX SETUP
key.
MACHINE DEFAULTS
01.CASSETTE SIZE
02.WALKUP SCREEN
03.TIMERS
key.
TIMER
1.AUTO CLEAR
2.AUTO LOW POWER
3.AUTO SLEEP
TIMERS
AUTO
SLEEP:
240MIN
45
3MIN
1
2
3
4
5
6
7
8
9
10
11
12
5-5