1-Sided Originals > 1-Sided Copies (Default Setting) - Toshiba e-STUDIO25 Operator's Manual

1-Sided Originals > 1-Sided Copies (default setting)
This copy mode is selected as the default setting when the copier is turned on. To change use the
following procedures.
1 Press the key on the control panel while in the
initial screen for copying.
• The "EDIT MENU" screen appears.
2 Confirm that "DUPLEX" is highlighted on the screen.
Press the key.
3 Select "1>1" by pressing the
Then press the
to the initial screen for copying.
Tip
The menu that appears here varies depending on whether
the auto-duplexer unit (optional) and the reversing automatic
document feeder (optional) are installed or not.
4 Select the desired paper cassette, reproduction ratio,
image density and copy quantity.
5 Place the original(s) on the feed tray or on the glass.
6 Press the key.
key.
key. Press the key to return
READY
DUPLEX :1 > 1
DUAL PAGE :OFF
IMAGE SHIFT :OFF
DUPLEX
Original > Copy
1 > 1
1 > 2
1
2
1
3
1
4
5
6
7
8
9
10
11
12
4-3