Toshiba e-STUDIO25 Operator's Manual page 117

5. ALTERNATION (Cont.)
When Placing the Original on the Glass
1
1 Press the
2
2 Select the "ALTERNATION" mode.
• Select "ALTERNATION" from the FINISHING menu by
pressing the
3
3
Key in the desired copy quantity using the numeric
keys.
4
Select the desired image density and reproduction
4
ratio.
5 Place the original and press the
5
• When scanning of the first original has finished, the "NEXT
ORIGINAL?" screen appears.
6
Select "YES," set the next original and press the
6 key.
• The copier starts scanning the original.
7
• Press the
temporarily. Press the
8
• If the
stopped, the scanned data is deleted, and the alternation is
terminated. Select "YES" or "NO" and press the
9
• When all originals are scanned, the copier automatically
starts copying and collates the copies into sets.
7 For the next and subsequent originals, repeat step
6.
10
8
When the last original has been finished being
scanned, select "NO."
11
12
6-8
FINISHING MODE SELECTION
key. The "FINISHING" screen appears.
key. Then press the
key to stop scanning the original
key to resume scanning.
key is pressed again when scanning has
READY
FINISHING: SORT
key.
key.
Copying
PAPER
FINISHING :ALTERNATION
Press START to resume
PAPER
FINISHING :ALTERNATION
Memory clear?
YES
NO
key.
Next Original?
YES
NO
1
SORT/OFFSET
ALTERNATION
3
: ST :AUTO
ZOOM:100%
3
: ST :AUTO
ZOOM:100%
3
3