Turning On The Power Switch / Auto Job Start - Toshiba e-STUDIO25 Operator's Manual

3. PAPER (Cont.)

Turning ON the Power Switch / Auto Job Start

1
1 Open the power switch cover and turn ON the switch.
• This message appears on the message display panel of
the basic screen :
2
Please wait
3
Wait warming up
4
2
The "Ready" message appears.
• This message indicates that the copier is ready for operation.
5
6
While the copier is warming up, place the original on the glass,
select the desired copy modes and press the
Wait warming up:Auto Start
7
When the machine reaches its proper operating temperature,
copying will automatically start.
8
Tip
Even after you have pressed the
the copy modes if copying has not yet started. To cancel the
9
auto job start mode, press the
10
11
12
1-10
BEFORE MAKING COPIES
Turning On the Power Switch
Auto Job Start
READY
PAPER
FINISHING :NONSORT ZOOM :100%
key.
key, you can change
key.
1
:APS :AUTO
EDIT