Toshiba e-STUDIO25 Operator's Manual page 120

When Placing the Original on the Glass
1 Press the key. The "FINISHING" screen appears.
2 Select the "STAPLE" mode.
• Select "STAPLE" from the FINISHING menu by pressing the
key. Then press the
3 Key in the desired copy quantity using the numeric
keys.
4 Select the desired image density and reproduction
ratio.
5
Place the original and press the
• When scanning of the first original has finished, the "NEXT
ORIGINAL?" screen appears.
6
Select "YES," set the next original and press the
key.
• The copier starts scanning the original.
• Press the
temporarily. Press the
• If the key is pressed again when scanning has
stopped, the scanned data is deleted, and the stapling is
terminated. Select "YES" or "NO" and press the
• When all originals are scanned, the copier automatically
starts copying and collates the copies into sets.
7 For the next and subsequent originals, repeat step
6.
8 When the last original has been finished being
scanned, select "NO."
9 Press the key or the
• The copier starts copying. In this copying mode, Stapled
each set of copies are ejected.
key.
key.
key to stop scanning the original
key to resume scanning.
key.
READY
FINISHING: SORT
SORT/OFFSET
STAPLE
Copying
PAPER : LT-R
FINISHING :ALTERNATION ZOOM:100%
Press START to resume
PAPER : LT-R
FINISHING :STAPLE
Memory clear?
YES
NO
key.
Next Original?
YES
NO
1
2
1
3
4
5
3
6
:AUTO
3
7
:AUTO
ZOOM:100%
8
3
9
10
3
11
12
6-11