Cable And Ethernet Specifications - Lucent Technologies PortMaster OR-HS Hardware Installation Manual

Office router
Table of Contents

Advertisement

Cable and Ethernet Specifications

This appendix gives specifications for the following:
Console cable—connects a data terminal equipment (DTE) device (terminal or
PC) to the S0 port (See page D-2.)
Modem cable—connects a data communications equipment (DCE) device
(modem) to the S0 port (See page D-3.)
V.35 cable—connects a T1/E1 line to the to the W1 port. (See page D-4.)
X.21 cable—connects a T1/E1 line to the to the W1 port. (See page D-5.)
RS-530 cable—connects a T1/E1 line to the to the W1 port. (See page D-6.)
Category 5 twisted pair cable for the S/T interface—connects an ISDN BRI
line to the S/T interface (See page D-7.)
Category 5 twisted pair cable for the U interface—connects an ISDN BRI line
to the U interface (See page D-7.)
Ethernet interface specifications (See page D-8.)
Cable and Ethernet Specifications
D
D-1

Advertisement

Table of Contents
loading

Table of Contents