10. Log In
Follow these instructions to log in to the Office Router.
1. From the login prompt, type !root and press the Enter key.
2. From the password prompt, press the Enter key—no password is needed
for a first-time installation.
login: !root
Password:
Command>
11. Set the Network Address
Set an IP address and netmask for an IP network, or an IPX network number and
frame type for an IPX network.
IP Address
Follow these instructions to set an IP address and netmask for the Office Router.
From the command prompt, enter the following information, pressing the
Enter key after each line.
Replace the italicized values with values appropriate for your network.
Command> set ether0 address 172.168.200.1
Command> set netmask 255.255.255.0
Command> save all
Command> quit
Installing the PortMaster Office Router
Log In
2-15