Table of Contents
Advertisement
Connect an Ethernet Cable
2. Set DIP switch 3 up (OR-U shown).
Ethernet 10Base5 (AUI)
Follow these instructions to connect an Ethernet cable to the Ethernet 10Base5
(AUI) port.
Required Equipment
RG-11 50-ohm coaxial cable with a DB-15 female connector (See "Ethernet
Specifications" on page D-8 for more information.)
This cable is available from most computer equipment suppliers.
Procedure
1. Connect the cable to the Ethernet AUI port (OR-U shown).
2-6
Ethernet
1186-0009
Ethernet
ISDN/U
S1-S2
S0
1
2
3
ISDN/U
S1-S2
S0
1189-0007
PortMaster Office Router Hardware Installation Guide
Advertisement
Table of Contents
