Connect An External Modem (Optional); Required Equipment; Procedure - Lucent Technologies PortMaster OR-HS Hardware Installation Manual

corporate backbone network. At the end of the configuration sequence, the
ORWizard displays a summary of the configuration settings. The configuration
settings can be backed up to a standard ASCII text file for troubleshooting purposes.

13. Connect an External Modem (Optional)

Follow these instructions to install an external modem. (See "External Modems" on
page E-2 for modem information.) Basic configuration must be completed before an
external modem is connected.

Required Equipment

Modem cable with RJ-45 and DB-25 connectors (See "Modem Cable" on page D-3
for pinout information.)
This cable is not included with the Office Router but is available from Lucent.
Specify product code CBL-MDB45.
External modem

Procedure

1. Attach the RJ-45 connector to the S0 port and the DB-25 connector to an
external modem.
2. Set DIP switch 1 down.
For modem configuration information, refer to the PortMaster Configuration Guide.
Installing the PortMaster Office Router
Ethernet
1186-0018
Ethernet
1186-0019
Connect an External Modem (Optional)
S1 - PC-Card S0
S0
S1 - PC-Card S0
1 2 3
2-17