Table of Contents
Advertisement
4. Connect an Ethernet Cable
The following Ethernet cables can be connected to the Office Router. (See "Ethernet
Specifications" on page D-8 for more information.)
Ethernet 10BaseT
Ethernet 10Base5 (AUI)
Ethernet 10BaseT
Follow these instructions to connect an Ethernet cable to the Ethernet 10BaseT port.
Required Equipment
Category 5 twisted pair cable, as specified by the EIA/TIA-568-B wiring standard,
with an RJ-45 connector (See "Ethernet Specifications" on page D-8 for more
information.)
This cable is available from most computer equipment suppliers.
Procedure
1. Connect the cable to the Ethernet 10BaseT port (OR-U shown).
Installing the PortMaster Office Router
Ethernet
1186-0007
Connect an Ethernet Cable
ISDN/U
S1-S2
S0
2-5
Advertisement
Table of Contents
