Table of Contents
Advertisement
Configure the Office Router
IPX Address
Follow these instructions to set an IPX address and frame type for the Office Router.
From the command prompt, enter the following information, pressing the
Enter key after each line.
Replace the italicized values with values appropriate for your network.
Command> set ether0 ipxnet AFAF0808
Command> set ether0 ipxframe ethernet_802.2
Command> save all
Command> quit
12. Configure the Office Router
To configure the Office Router, you can use one of the following:
•
Command Line Interface. If you are using the command line interface to
configure the Office Router, refer to the Command Line Reference and the PortMaster
Configuration Guide for instructions.
•
PMVision. PMVision is a Java application used to configure, monitor, and manage
any PortMaster product. PMVision has a Java tree for navigating to the various
features of the application. The features in PMVision include the following:
–
–
–
–
–
–
•
ORWizard. The ORWizard is a Java software tool for initial setup of the Office
Router. The ORWizard sequentially prompts you through the configuration process
for an outbound dial-up network connection to an Internet service provider (ISP) or
2-16
Monitor allows you to dynamically monitor operations of the selected
PortMaster product.
Graph allows you to view modems and sessions on a graph.
Diagnose diagnoses problems with selected PortMaster products.
Maintain backs up, restores, and upgrades selected PortMaster products.
Command sends ComOS commands to selected PortMaster products.
Configure adds and changes configuration settings on selected PortMaster
products.
PortMaster Office Router Hardware Installation Guide
Advertisement
Table of Contents
