Controls And Features - Troy-Bilt LS 33 TB Operator's Manual

Controls and Features

Jack Stand
Engine Controls
See the accompanying engine manual for the location and
function of the controls on the engine.
Beam Locks
These two locks are used to secure the beam in the horizontal
or the vertical position. The vertical beam lock is located on the
tank bracket nearest to the engine. The horizontal beam lock is
located on the beam support latch bracket.
Wedge
The wedge is used to split the wood.
14
Cylinder
Tongue
Beam
Horizontal
Support
Beam Lock
Log Dislodger
Wedge
Figure 4-1
Log Dislodger
The log dislodger is designed to remove any partially split wood
from the wedge. This may occur while splitting large diameter
wood or freshly cut wood.
Control Handle
The control handle has three positions; forward, neutral and
reverse and controls the movement of the wedge.
Tongue
The tongue is used to attach to a towing vehicle for
transportation.
Control
Handle
Beam Assembly
Log Cradle
Vertical
Beam Lock
4