Canon imageRUNNER 3300 Series Copying Manual page 108

1
2
2
2-24 Making Copies with Margins (Margin)
Place your original, and press "Special Features"
Select the type of margin, and press
IMPORTANT
•
If you are using the Margin and Two-sided modes together and copying an original that
already has a left or right margin, follow the instructions below:
- 1 2-sided: Set the margin for the back only.
- 2 2-sided: You do not need to set the margin. Proceed to make copies in the usual way.
- 2 1-sided: Set the margin for the back only.
•
If you are using the Margin and Two-sided modes together and copying an original that does
not have a margin, then follow the instructions below:
- 1 2-sided: Set the margin for both the front and back.
- 2 2-sided: Set the margin for both the front and back.
- 2 1-sided: Set the margin for both the front and back.
NOTE
•
If you want to enter values in millimeters, press "mm."
•
The default setting is 3/8" (10 mm).
A
press "Margin."
Next.
" "