6
1
1-12
Flow of Copy Operations
Press
(Start).
Clear
EF
NO
Start
XY
Power
Copying starts.
When scanning is completed, remove the original.
If the optional Card Reader-C1 is attached, remove the control card. (See the Reference
Guide.)
If you have set the Department ID Management, press
IMPORTANT
•
While copying, you cannot change copy mode settings, such as the copy quantity, paper
size, and copy ratio.
NOTE
•
If there is a current job, the machine scans the original, and waits to print it. Printing starts
when the current job is completed.
Stop
(ID). (See the Reference Guide.)