Specifying Paper Size/Type (Manual Paper Selection) - Canon imageRUNNER 3300 Series Copying Manual

Specifying Paper Size/Type (Manual Paper Selection)

You can make copies after selecting the paper size and type (color, recycled, etc.) of paper
loaded in the paper drawer.
1
Place your originals, and press "Paper Select."
NOTE
•
The default setting is "Auto."
2
Select the desired paper size.
When Finisher-J1 is attached
To select the stack bypass when paper is fed from the stack bypass for the current job or
reserved job, press "Stack Bypass Setting."
NOTE
•
The paper sizes are displayed in the order in which they are loaded in the paper drawers.
•
displayed on the touch panel indicates that the paper is set vertically;
the paper is set horizontally. Paper sizes with the suffix <R> (such as LTRR) indicate paper
placed in the paper drawer or the stack bypass horizontally.
•
The paper sizes which are loaded in the paper drawers are shown on the display.
•
The paper type (color, recycled) loaded in the paper drawers is indicated by the displayed
icons. (See the Reference Guide.)
When Saddle Finisher-G1 and
Paper Deck-L1 are attached
Selecting the Copy Paper Size (Paper Select)
1
indicates that
1-19