Canon imageRUNNER 3300 Series Copying Manual page 45

4
Press "Original Size" and enter the original size
and enter the copy size
When entering values in millimeters, you can use
numbers and (Clear) to clear your entries.
The display returns to the Basic Features screen, and the specified copy ratio is displayed.
If the copy ratio is less than 25%, a message appears telling you that the ratio will be
adjusted to 25%. If it is more than 800%, a message appears telling you that the ratio will
be adjusted to 800%.
NOTE
•
When the copy ratio is larger than 400%, place the original on the platen glass.
•
If you make a mistake when entering values, press "C," and enter the correct value.
•
To specify the sizes of the horizontal direction (X) and the vertical direction (Y) independently,
press "XY Zoom."
•
If you want to enter values in millimeters, press "mm."
•
For details of how to enter the values in inches, see the Reference Guide.
5
Press (Start).
Copying starts.
NOTE
•
To return the copy ratio to 100%, press "Direct."
To cancel the setting, press "Copy Ratio" A "Other Zoom" A "Zoom Program" A "Cancel," in
•
this order.
•
To cancel all settings and return the machine to the Standard mode, press
A
press "OK."
-
Changing the Copy Ratio (Copy Ratio)
A
press "Copy Size"
(numeric keys) to enter
(Reset).
1-37
1